Processor

ARM 9 166 MHz

  I/O controller

16C950 or compatible

  Memory

16MB SDRAM, 2 MB Flash

  Connector type

RJ45 for LAN, DSUB 9 male for serial Port

  LAN interface

Auto-detecting 10BaseT/100BaseTx

  Protocols

TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS

  Serial interface

RS232/422/485 selected by software or DIP-switch

  No. of port

1, Speed up to 3.6 Mbps

  Available Modes

RS232 full duplex
RS422 full duplex
RS485 4 wire, full duplex
RS485 2 wire, half duplex, with echo
RS485 2 wire, half duplex, without echo

  Signals

RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS422: Tx+/-, Rx+/-, GND
RS485 2 wire: Data+/-, GND
RS485 4 wire: Tx+/-, Rx+/-, GND

  RS485 Data Control

Controlled by ART (Automatic Receive Transmit control) or by RTS

  Speed

RS232: up to 500 kbps
RS422/485: up to 3.6Mbps

  Parity

None, even, odd, space, mark

  Data bits

5, 6, 7, 8

  Stop bits

1, 1.5, 2

  IRQ

None

  I/O address

None

  Driver Mode

VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions.
The Driver creates a virtual Com port, using Vscom NetCom protocol.

  TCP Raw Server

Raw data transfer over TCP/IP. Accepts multiple incoming connections.

  TCP Raw Client

Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.

  TCP Advanced
  Settings

Special settings for user-defined modes.

  UDP Mode

Raw data transfer by UDP. The NetCom is client and server at the same time. Timeout functionality, maximum packet size and a configurable trigger string define the packets of incoming data to send over UDP

  Null Modem Tunnel

Connecting two NetCom used as virtual null modem cable.

  IP Modem

The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.
Windows "INF"-Driver provided for installation.

  Print Server

The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems.

  Installation

Configuration utility automatically finds NetCom devices in the network

  Operating Mode

Automatic mode switching between Driver and TCP RAW mode.
With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used.

  Configuration

Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP.

  SNMP

Special VScom MIB included

  ART

Automatic Receive Transmit control for RS485

  DNS

Domain Name Server support

  Serial interface

Serial Interface configurable with DIP switch and by software

  Firewall

Special precautions for Firewall environments

  Firmware

Firmware update over WEB Browser, Telnet, ComPort

  LEDs

LEDs for Power, serial Tx, Rx, Ethernet Link, Speed

  Password access

Every capabilities of configuration use the same password including SNMP V3

  Secure communication

OpenVPN™ tunnel provides security on Ethernet. The tunnel protects the configuration as well as all serial data. It is also usable across the Internet.
Strong encryption by AES up to 256 bit keys.

  Power requirements

9 - 30V DC, 250mA @ 12V

  Power supply Adapter

12V DC, 1A. Connected by Terminal block

  Dimensions

73 x 115 x 27 mm (W × L × H)
 101 x 121 x 27 mm (W × L × H) with DB9 connector and DIN-Rail mounting kit

  Operating Temp.

0°C - 55°C

  Storage Temp.

-20°C - 85°C

  Case

SECC sheet metal (1mm)

  Weight

0.2Kg

  EMC

FCC Class A, CE Class A

  Environment

RoHS

  Art.No

675

  Product Name

NetCom 113 PRO

  Art.No

675V2 (supports SSL)

  Product Name

NetCom 113 PRO V2

  Packing list

 . NetCom 113 PRO
 . Power supply adapter 12V, 1000mA
 . CD-ROM with Driver and configuration software
 . Printed Quick Installation Guide


  Optional Accessories

 . DK 35A - DIN-Rail mounting kit