Features | |
| |
Back to Top | |
Specifications | |
Hardware | |
I/O controller | 2 x 16C950C, each with 128 bytes Tx/Rx FIFO |
Connector type | Male DB9 |
Interface | |
Bus interface | PCI Express x 1 |
Serial interface | RS232, RS422 / 485 |
No. of ports | 2 |
Signals | RS232: TxD,RxD, CTS,RTS isolated and surge protected RS422 Tx+/-, Rx+/-, RTS+/-, CTS+/-, GND RS485 Data+/-, GND |
RS485 data control | ART (Automatic Receive Transmit control) |
Built-in termination resistor | RS422: 120 Ohm RS485: 120 Ohm, DIP enable / disable |
Back to Top | |
Performance | |
Speed | RS232: up to 921.6Kbps RS422/485: up to 3.6Mbps |
Max. no. of ports | Unlimited |
Configuration | |
Parity | None, even, odd, space, mark |
Data bits | 5, 6, 7, 8 |
Stop bits | 1, 1.5, 2 |
IRQ | Assigned by System |
I/O address | Assigned by System |
Available modes | |
RS232 | Full duplex |
RS422 | Full duplex |
RS485 | 4 wire , full duplex |
RS485 | 2 wire, half duplex, with echo |
RS485 | 2 wire, half duplex, without echo |
Power and Environment | |
Power requirement | 430mA max.(+5V) |
Operation temp. | 0°C - 55°C |
Dimension | 80mm x 59mm |
Back to Top | |
Operating Systems | |
WIN 2000, XP, Vista | VScom high performance serial driver |
Ordering Information | |
Art.No | 4506 |
Product Name | VScom 200Ei-SI PCIex |
Packing list | . VScom 200Ei-SI PCIex . CD, English documentation |
Back to Top |